Taco’s Hot-LinkPlus-e ® ECM High-Efficiency Instant Hot Water System combines the easy-to-install Hot-Link® Valve with the 006e3 ® hot water circulation pump and the award winning SmartPlug Instant Hot Water Control ®. The Hot-LinkPlus-e ® ECM High-Efficiency Instant Hot Water System provides hot water on demand while maximizing energy savings. Using existing plumbing with a tank water heater, no dedicated hot water return line is needed.

“Smart” Mode: When set to “Smart” mode, the SmartPlug monitors and records the home’s hot water usage pattern over a 7 day period. The SmartPlug will use the preceding week’s usage pattern to automatically cycle the 006e3 ON, so hot water is always available when it’s needed. The recording and repeating process is continuous, week after week.

“Pulse” Mode: When set to “Pulse” mode, the SmartPlug will continuously cycle the 006e3 ON for 5 minutes, then OFF for 10 minutes to maintain hot water at all fixtures.

Vacation Mode: After 36 hours of no hot water usage, the SmartPlug will automatically turn the 006e3 OFF and remain off until hot water usage is detected.

Exercise Function: While in vacation mode the SmartPlug will cycle the 006e3 for 10 seconds every 7 days to prevent any corrosion or scale build up.

Flow Range: 0-11 GPM

Head Range (ft): 0-13′

Max. Operating Pressure: 150 PSI

Max. Water Temp.: 203°F (95°C)

Min. Water Temp.: 36°F (2°C)

Voltage: 120V, 60 Hz Single phase

Max. Operating Power: 44W

Max. AMP Rating: 0.54

Connection Sizes: ¾” NPT male & female union (included)