This heavy-gage copper-bonded #114-CO offset carrier bracket mounts directly to a 4-bolt siphon jet closet carrier and positions the flush valve at 14" above the top carrier mounting bolt, and offsets it 4-3/4" from the center of the carrier. A patent pending "figure 8" hole pattern on top provides 1/4" left or right offset for flush valve support providing a single bracket to be used in a left or right hand installation while providing the desired 4-3/4" center line rough-in. This installation typically places the flush valve at 11-1/2" above the fixture. When soldering, heat the pipe, not the bracket.

• Copper-bonded, heavy-gage steel brackets mount directly to 4-bolt toilet carrier and position flush valve at height of 11-1/2″ above toilet
• For 1″ flush valve support on wall hung toilet carriers
• Allows for rough-in prior to framing being erected
• Provides 4-3/4″ off set rough-in (right or left hand)